What does a flybridge enclosure include?

A rigid system of impact modified acrylic panels bonded into marine-grade aluminum framing around the flybridge and, where specified, the aft deck. Configurations run from forward 3 sides to full four-sided surrounds.

Do you have documented examples on motor yachts?

Yes. Our documented signature build is a 72-foot Princess flybridge: forward 3 sides, 8 panels, Charcoal Stamoid borders, black PTFE Lifetime thread, flap-covered black YKK zippers, 3 EZ Vents in the forward panels, and the bottom tracked to the windshield.

How much UV protection does the panel material block?

The 80 gauge impact modified acrylic used on every hard enclosure blocks 98% of broad-spectrum UV and transmits 91% of visible light per ASTM D1003.

Does the flybridge enclosure get hot in Florida heat?

It doesn't have to. EZ Vent openings are built into the forward panels and move fresh air behind the enclosure without wind intrusion or noise, then seal fully closed when weather turns. The feature is exclusive to hard acrylic systems.

What is the warranty on a motor yacht flybridge enclosure?

Yes to coverage: the five-year prorated limited warranty applies to every EZ2CY enclosure, and the marine aluminum framing typically outlasts the panels themselves.

Can the aft deck be a different system than the flybridge?

Yes. On complex layouts we build combination systems, rigid acrylic on the flybridge and soft isinglass on the aft deck, for full coverage with cockpit flexibility.

ChatGPT Image Aug 17, 2026, 10_15_02 AM.png

Hard Acrylic • Impact Modified

Motor Yacht &
Flybridge Enclosures

Name: Motor Yacht & Flybridge Enclosures
Brand: EZ2CY

Flybridge and aft deck enclosures built in impact modified acrylic for motor yachts.

Request a Mesurement

1-800-448-4317

EZ2CY® builds hard acrylic flybridge and aft deck enclosures for motor yachts, engineered for clarity and rigidity. Configurations run from forward 3 sides to full four-sided surrounds, depending on how the bridge is used. Some of our most visible installs sit on Princess and Viking flybridge yachts, and our documented signature build is a 72' Princess flybridge, measured on the vessel and fabricated in our Riviera Beach, Florida shop.

98%

Broad-spectrum UV blocked — built into the material

91%

Light transmission — exceeds glass clarity

10-11yrs

Typical service life — 18+ years documented

5-yr

Limited warranty on every enclosure

Since 1992 • Impact Modified Acrylic

Custom-measured for every
hull.

ChatGPT Image Apr 7, 2026, 01_09_15 PM.png

72' Princess Flybridg

Our documented signature build, measured and fabricated on the vessel. The spec: forward 3 sides, 8 panels of 80 gauge rigid impact modified acrylic, Charcoal Stamoid borders, black PTFE Lifetime thread, black YKK zippers covered by external weather flaps, black Velcro closures, 3 EZ Vents in the forward panels, and the bottom tracked to the windshield.

What goes into every enclosure

Why EZ2CY®

From measurement to installation

01
On-vessel measurement

We board your vessel and measure every panel opening, frame structure, and mounting point, accounting for hardware and frame curvature.

02
In-house fabrication

80 gauge impact modified acrylic panels are cut, edged, and fitted in our Riviera Beach shop. Frames are built from marine-grade aluminum, and EZ Vent hardware goes into the forward panels where specified.